Cub-cadet Z-Force Series User Manual download pdf (Page 8)

Z Force

4.5. Remove the spindle shaft and pulley from the

spindle housing. See Figure 4.5.

NOTE: If the spindle is to be removed from the

deck, rather than serviced in-situ, the pulley and

shaft must be removed before the spindle hous-

ing can be removed from the deck.

4.6. Using a 1/2” socket and extension remove the

four bolts holding the spindle housing to the

deck. See Figure 4.6.

5. SPINDLE

NOTE: Spindles can be rebuilt while attached to

deck, or they can be removed for service.

5.1. If the spindle is removed from the deck, carefully

fixture it in a bench vice.

5.2. Remove covers. See Figure 5.2.

5.3. Using soft drift, remove the bottom bearing from

the spindle housing. See Figure 5.3.

NOTE: The seal will come out with the bearing

5.4. Remove the spacer that fits between the bear-

ings.

5.5. Repeat bearing and seal removal on the second

bearing in the spindle housing.

Figure 4.5

Spindle pulley

Hex head on

spindle shaft

Figure 4.6

bolts

Spindle

Figure 5.2

Bearing cover (bottom)

Figure 5.3

Tapered roller bearing

Seal

Note: lip

faces out

Spindle housing

seen from top

Insert drift

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

No comments

Cub-cadet Z-Force Series User Manual Page 8