Cub-cadet Z-Force Series User Manual download pdf (Page 25)

Z Force

11.10. Withdraw the shaft, catching the washers. Allow

the bellcranks and steering link rods to hang

down from the hydros. See Figure 11.10.

11.11. If the bellcranks are to be removed (eg. for bush-

ing replacement), disconnect the control links

from the IHTs, and remove them. They can be

easily serviced on the bench.

11.12. Move the deck height control to the highest posi-

tion.

11.13. Remove the nuts from the ends of the long bolts

that connect the lift handle arms to the lift shaft

assembly using a pair of 1/2” wrenches.

11.14. Using an appropriate tool, disconnect the exten-

sion springs from each lift handle arm.

See Figure 11.14.

11.15. Remove the second nut from each long bolt, and

remove the bolts completely.

Figure 11.10

Figure 11.14

Lift handle

arm

Lift shaft assembly

Long bolt

(first nut removed)

Short

bolt

11.16. Remove the short bolt that connects each lift

handle arm to the lift shaft assembly using a 1/2”

wrench.

11.17. Spread the ends of the lift rod index apart and

disengage it from the lift shaft assembly.

See Figure 11.17.

11.18. Separate the lift handle arms from the lift shaft

assembly.

11.19. Unbolt the lift hub assembly from each side of

the control housing using a 1/2” wrench.

See Figure 11.19.

Figure 11.17

Figure 11.19

Lift hub bolts

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

No comments

Cub-cadet Z-Force Series User Manual Page 25