Cub-cadet Z-Force Series User Manual download pdf (Page 29)

Z Force

13. PIVOT BAR

13.1. Lift and safely support the Z-Force by the frame

in front of the deck. See Figure 13.1.

13.2. Wheel removal can be done with two 3/4”

wrenches. Remove the nut and withdraw the

axle bolt.

13.3. There is a spacer that fits over each side of the

wheel bearing, keeping the wheel centered

between the caster wheel mounting bracket.

See Figure 13.3.

13.4. The roller bearings in the wheel ride on the axle

bushing. Other than regular lubrication with

grease, the bearing is non-serviceable.

Figure 13.1

Figure 13.3

Spacer

Axle

bushing

13.5. If the pivot bar is to be removed, the foot rest

bracket must be removed first, using a pair of

1/2” wrenches. See Figure 13.5.

NOTE: The deck need not be removed.

13.6. Remove at least one caster wheel assembly

using a 9/16” wrench. See Figure 13.6.

Figure 13.5

Foot rest bracket

Figure 13.6

1 2 ... 24 25 26 27 28 29 30 31 32 33 34

No comments

Cub-cadet Z-Force Series User Manual Page 29