Cub-cadet Z-Force Series User Manual download pdf (Page 7)

Z Force

2.10. Remove both front lift rods.

2.11. Pull the J-pins outward to release rear deck lift

hangers. Rotate the J-pins to lock them in the

out position

2.12. Raise lift. Confirm that none of the belts or link-

ages will interfere with removal of the cutting

deck.

2.13. Pull cart from under lift.

3. DECK BELT REMOVAL

CAUTION: Before doing any work to the deck, it

needs to be safely secured so that it will not fall.

See Figure 3.0.

3.1. Insert a 3/8” breaker bar into the hole on idler

arm assembly. Rotate the idler arm to the left

while rolling belt off of the flat idler pulley.

See Figure 3.1.

Figure 3.0

Strap

Deck service

cart (Heftee)

Figure 3.1

Stationary

Idler

arm

Flat idler

(tensioning)

idler

3.2. Pull the belt below the flat idler and remove the

belt from the spindle assemblies and stack pul-

ley.

4. SPINDLE REMOVAL

4.1. Strap deck to cart.

4.2. Tilt top of cart until securely locks in place.

4.3. Using two 1 1/8” wrenches remove blade nut

from spindle shaft. See Figure 4.3.

4.4. Remove blade and spacer. See Figure 4.4.

Figure 4.3

Figure 4.4

Spacer

1 2 3 4 5 6 7 8 9 10 11 12 ... 33 34

No comments

Cub-cadet Z-Force Series User Manual Page 7