Cub-cadet Z-Force Series User Manual download pdf (Page 5)

1. DECK LEVELING

1.1. Park the mower on a flat paved surface, engage

the parking brake, shut off engine, remove the

key from ignition switch, disconnect the spark

plug wires.

1.2. Check front tire pressure. Adjust as necessary to

20-25 psi.

1.3. Check rear Drive tire pressure. Adjust as neces-

sary to 8-10 psi.

NOTE: Tire pressure can effect blade height as

much as a 1/4 “

1.4. Measure the distance from the right rear corner

of the transmission mounting bracket to the

ground. Repeat on the left side. See Figure 1.4.

1.5. Adjust tire pressure within specified range, to

equalize the left and right measurements. This

will level the frame right to left.

Figure 1.4

1.6. To make side to side level adjustment align

blades across the width of the deck, perpendicu-

lar to with center line of the mower.

See Figure 1.6.

1.7. Measure height of the outer tip of the right blade.

1.8. Measure height of the outer tip of the left blade.

1.9. Adjust the threaded link at the left side of the

deck, using two 3/4” wrench, so the height of the

blade tips match. The right side link is not

adjustable. See Figure 1.9.

Figure 1.6

Measure blade height

Figure 1.9

Deck height

adjustment nuts

Z Force

1 2 3 4 5 6 7 8 9 10 ... 33 34

No comments

Cub-cadet Z-Force Series User Manual Page 5