Cub-cadet Yanmar 3TNV72 User Manual download pdf (Page 48)

GENERAL SERVICE INFORMATION

TNV IDI Service Manual

4-13

Engine Oil

To prime the fuel system if a mechanical fuel pump

is installed:

1. Operate the fuel priming lever (Figure 4-4, (1))

several times until the fuel filter cup

(Figure 4-4, (2)) is filled with fuel.

2. NEVER use the starter motor to prime the fuel

system. This may cause the starter motor to

overheat and damage the coils, pinion and / or

ring gear.

Figure 4-4

ENGINE OIL

Engine Oil Specifications

Use an engine oil that meets or exceeds the

following guidelines and classifications:

Service Categories

• API Service Categories CD or higher

• ACEA Service Categories E-3, E-4, and E-5

• JASO Service Category DH-1

Definitions

• API Classification (American Petroleum

Institute)

• ACEA Classification (Association des

Constructeurs Européens d'Automobilies)

• JASO (Japanese Automobile Standards

Organization)

Note:

1. Be sure the engine oil, engine oil storage

containers, and engine oil filling equipment are

free of sediments and water.

(1)

0000649A

(2)

CAUTION

• Only use the engine oil specified.

Other engine oils may affect warranty

coverage, cause internal engine

components to seize and / or shorten

engine life.

• Prevent dirt and debris from

contaminating the engine oil. Carefully

clean the oil cap / dipstick and the

surrounding area before you remove

the cap.

• NEVER mix different types of engine

oil. This may adversely affect the

lubricating properties of the engine oil.

• NEVER overfill. Overfilling may result

in white exhaust smoke, engine

overspeed or internal damage.

0000005en

TNV_IDI_ServiceManual_(3TNV72 for YN only).book 13 ページ２００７年１１月２９日　木曜日　午後２時５８分

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 282 283

Comments to this Manuals

No comments

Cub-cadet Yanmar 3TNV72 User Manual Page 48

Comments to this Manuals

Related products and manuals for Special machinery Cub-cadet Yanmar 3TNV72