Cub-cadet Yanmar 3TNV72 User Manual download pdf (Page 161)

ENGINE

6-62 TNV IDI Service Manual

Cylinder Block

IMPORTANT

Be sure to align the flats on the oil pump

with the flats on the crankshaft gear.

3. Reinstall the timing gear case cover.

4. Reinstall and tighten the gear case cover bolts.

5. Reinstall the crankshaft pulley.

6. Reinstall the washer and bolt. Tighten to the

specified torque. See Special Torque Chart on

page 6-14 for specifications.

Installation of Oil Pan

1. Reinstall the oil pickup tube (Figure 6-100, (1))

and a new O-ring (Figure 6-100, (2)).

Figure 6-100

2. Apply a continuous bead of ThreeBond Liquid

Gasket No. 1212, Yanmar Part No.

977770-01212 to the mounting surface of the oil

pan (Figure 6-101, (2)) and crankcase

extension (if equipped) (Figure 6-101, (1)). Be

sure to circle each bolt hole.

3. If equipped, reinstall the crankcase extension

(Figure 6-101, (1)). Reinstall the oil pan and

tighten the bolts securely.

Figure 6-101

Final Assembly of Engine

1. Reinstall the starter motor.

2. Reinstall the cylinder head. See Reassembly of

Cylinder Head on page 6-31.

3. Reinstall the engine in the machine.

4. Reconnect the fuel and coolant lines.

5. Reinstall the alternator.

6. Reconnect and adjust the throttle cable.

7. Reconnect all electrical connections.

8. Fill the engine with oil and coolant.

9. Reconnect the battery cables, negative (-) cable

last.

0002185

(2)

(1)

0002184

(2)

(1)

TNV_IDI_ServiceManual_(3TNV72 for YN only).book 62 ページ２００７年１１月２９日　木曜日　午後２時５８分

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 282 283

Comments to this Manuals

No comments

Cub-cadet Yanmar 3TNV72 User Manual Page 161

Comments to this Manuals

Related products and manuals for Special machinery Cub-cadet Yanmar 3TNV72