Cub-cadet Yanmar 3TNV72 User Manual download pdf (Page 233)

STARTER MOTOR

10-20 TNV IDI Service Manual

Starter Motor

5. Install a switch (Figure 10-37, (6)) in a circuit

between the battery positive (+) terminal

(Figure 10-37, (2)) and the starter solenoid

switch terminal (Figure 10-37, (8)) on the

starter motor.

6. Use a suitable tachometer to monitor the rpm of

the starter.

7. Turn the switch to the ON position to energize

the solenoid and operate the starter. Monitor

the rpm, amperage draw and voltage. For test

specifications, see Starter Motor Information on

page 10-5 for the appropriate starter motor.

Installation of Starter Motor

1. Reinstall the starter motor to the flywheel

housing.

2. Reinstall the starter mounting bolts

(Figure 10-38, (1)). Tighten the bolts to

specification. See Tightening Torques for

Standard Bolts and Nuts on page 4-22.

Figure 10-38

3. Reconnect the electrical wires to the solenoid

switch assembly. Be sure to place the cover

over the battery positive (+) cable connection.

4. Reconnect the battery, negative (-) cable last.

(1)

0002126

TNV_IDI_ServiceManual_(3TNV72 for YN only).book 20 ページ２００７年１１月２９日　木曜日　午後２時５８分

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 282 283

No comments

Cub-cadet Yanmar 3TNV72 User Manual Page 233