Cub-cadet Yanmar 3TNV72 User Manual download pdf (Page 249)

ALTERNATOR

11-16 TNV IDI Service Manual

Alternator

Figure 11-18

11. Reassemble the pulley (Figure 11-18, (2)) and

nut (Figure 11-18, (1)) to the shaft of the rotor

assembly. Tighten the nut.

Installation of Alternator

1. Position the alternator on the gear case.

Loosely reinstall the nut (Figure 11-19, (2)) on

the gear case stud and the V-belt adjuster bolt

(Figure 11-19, (1)).

Figure 11-19

2. Reconnect the electrical wires to the alternator.

Tighten the nuts to 15 - 20 in.-lb (1.7-2.3 N·m;

17-23 kgf·m).

3. Reinstall the V-belt. Tighten the V-belt to the

proper tension. See Check and Adjust Cooling

Fan V-Belt on page 5-27.

4. Start the engine. Listen for any unusual sounds

from the alternator.

5. Verify that the charge indicator is ON while the

engine is operating. If the charge indicator is

not ON, repair the problem before operating the

engine.

0000256

0000264

CAUTION

Do not operate the engine if the

alternator is producing unusual sounds.

Damage to the alternator will result.

0000039en

TNV_IDI_ServiceManual_(3TNV72 for YN only).book 16 ページ２００７年１１月２９日　木曜日　午後２時５８分

1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 282 283

No comments

Cub-cadet Yanmar 3TNV72 User Manual Page 249