Cub Cadet 524 SWE Operator's Manual download pdf (Page 12)

Snow thrower controls and features are described below and

illustrated in Fig. 4-1.

Shift Lever

The shift lever is located in the right side of the

handle panel and is used to determine ground

speed and direction of travel.

Forward

There are six forward (F) speeds. Position one (1) is

the slowest and position six (6) is the fastest.

Reverse

There are two reverse (R) speeds. One (1) is the

slower and two (2) is the faster.

Choke Control

The choke control is found on the rear of

the engine and is activated by rotating the

knob counter-clockwise. Activating the

choke control closes the choke plate on the

carburetor and aids in starting the engine.

Key

The key is a safety devise. It must be fully

inserted in order for the engine to start.

Remove the key when the snow thrower is

not in use.

Note: Do not turn the key in an attempt to

start the engine. Doing so may cause it to

break.

Figure 4-1

Skid Shoe

Augers

Auger Control

Chute Directional Control

Shift Lever

Drive Control

Chute Assembly

Clean Out

Tool

Trigger

Muffler

Primer

Key

Throttle

Control

Choke

Control

Oil Drain

Electric Starter

Outlet

Electric Start

Button

Recoil Starter

Handle

Gas Cap

Oil Fill

Controls and Features

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments

Cub Cadet 524 SWE Operator's Manual Page 12

Comments to this Manuals

Related products and manuals for Snow throwers Cub Cadet 524 SWE