Cub Cadet 600 Operator's Manual

Safety • Assembly • Operation • Tips & Techniques • Maintenance • Troubleshooting • Parts Lists • WarrantyWarning: This unit is equipped with an i

10Mounting the Idler Assembly(42, 46, 50, 54 inch Decks with Electric PTO)If you’re mounting this snow thrower attachment to a tractor equipped with

11Mounting Undercarriage AssemblyMake certain the correct upper drive belt (754-0498) is installed on the undercarriage assembly. If the appropri-ate

12Because this snow thrower attachment is compatible with several model lawn tractors and garden tractors with either an electric PTO or a manual PTO,

134. Align the holes in the rear of the lift arms with the holes in the rear of the undercarriage and insert the clevis pins removed in step 1. Fast

14Bracket AssemblyWARNING: Before installing attach-ment, place tractor on a firm and level surface. Place the PTO in the disen-gaged (OFF) position,

155Figure 20 Before installing attachment, place tractor on a firm and level surface. Place the PTO in the disengaged (OFF) position, set the parking

16Attaching the Chute Directional Control1. Secure the upper chute crank rod to the joint block (A) on the lower chute crank rod with the cotter pin

177Mounting Auger Housing All ModelsBefore installing attachment, place tractor on a firm and level surface. Place the PTO in the disen-gaged (OFF) p

18Figure 291. Attach and route the upper drive belt around the spindle pulley and idler pulley found on the undercarriage, the electric PTO clutch an

19Belt Routing Various Models8Before installing attachment, place tractor on a firm and level surface. Place the PTO in the disen-gaged (OFF) position

2Finding and Recording Model NumberModel Number Serial NumberBEFORE YOU START ASSEMBLING YOUR NEW EQUIPMENT, please locate the model plate and copy th

20WARNING: Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.Engaging the Augers and

2110OperationOPERATIONWARNING: Read, understand, and follow all instructions and warnings on the tractor, attachment, and in the Operator’s Manuals b

2211AdjustmentsAll ModelsMaking AdjustmentsWARNING: Never attempt to make any adjustments while the engine is running, except where specified in the O

2312MaintenanceAll ModelsBefore lubricating, repairing, or inspecting, place tractor on a firm and level surface. Place the PTO in the disengaged (OFF

24 

2513REF NO.PART NUMBERDESCRIPTION Qty1 Auger Gear Box (Incl. Ref. 23-41) 12 Impeller Assembly, 12” 13 Housing Assembly 14 Housing Brace Bracket 15 LH

26AACCBB6215161721122019185360565654144170417337656466674654307263471682644824343245492839425859292622431091147450354629234273843654036323931333347512

27REF NO.PART No. DESCRIPTION Qty.1 Knob 12 Chute Tilt Handle 13 Chute Tilt Cable Guide 14 Nylon Hex Lock Nut, 5/16-18 225 Chute Tilt Bracket Assembl

284439AA384042413938AAAABB61BB594611562865410161210579506811812586474748103052605336373118344349516312291413493551920251635623321232422101615175262510

29REF NO.PART No. DESCRIPTION Qty.1 Spindle Assembly (Incl. 38-44) 12 Pulley Mounting Bracket 13 Hex Cap Screw, 3/8-16 x 1.75 24 Self Tapping Screw 45

31Rider Model IdentificationFastAttach™ Snow Thrower AttachmentNOTE: This Operator’s Manual covers several models. Snow thrower hook-up instructions v

30NOTES:Use this page to make notes and write down important information.14

31NOTES:Use this page to make notes and write down important information.14

The limited warranty set forth below is given by MTD LLC with respect to new merchandise purchased and used in the United States, its possessions and

42Safe Operation PracticesTraining1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble

5Operation1. Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly. Contact with the rotating parts can amput

63Carton ContentsIf you are missing any parts, please do not contact the retailer where you purchased this unit, call MTD directly at 1-330-220-4MTD o

7CONTENTS OF CARTONBefore beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed belo

8 Before installing attachment, place tractor on a firm and level surface. Place the PTO in the disengaged (OFF) position, set the parking brake, shut

9 Before installing attachment, place tractor on a firm and level surface. Place the PTO in the disengaged (OFF) position, set the parking brake, shut