Cub Cadet M467 Operator's Manual download pdf (Page 18)

Service

Fuses

Unlatch and lift hood forward to get access to under the

dash panel.

Remove fuse holder cover. See Fig. 7-2.

Remove the appropriate electrical fuse and replace with

proper amperage fuse.

Lower and secure hood.

Headlight Bulbs

Raise hood to get access to the headlight assembly.

Turn the bulb/socket assembly approximately a quarter

turn counterclockwise to align its tabs with the notches of

the reflector, then remove from the reflector. See Fig. 7-1.

Unplug the wire harness from the bulb/socket assembly.

Plug the new bulb/socket assembly into the wire harness.

Align the tabs of the new bulb/socket assembly with the

notches of the reflector and insert the bulb. Turn the bulb/

socket assembly clockwise to lock in place.

Lower and secure hood.

Figure 7-1

Figure 7-2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

No comments

Cub Cadet M467 Operator's Manual Page 18