Cub Cadet M467 Operator's Manual download pdf (Page 17)

17sectiOn 6 — Maintenance & adjustMents

Draining CVT Cover

Drain CVT cover every 50 hours or after driving vehicle through

more than 12” of water.

Remove CVT cover drain plug. See Fig. 6-7.

Allow water to completely drain out.

Reinstall drain plug, and tighten securely.

Cleaning

The body panels are scratch and impact resistant automotive

quality ABS plastic. The use of standard car wash soap and

non-abrasive car wax is acceptable for cleaning the body panels.

Avoid any abrasive cleaner or rubbing compounds for these will

damage the body panels. Dry thoroughly to avoid water spots.

WARNING: DO NOT use a pressure washer.

Damage may occur if direct hose spray comes in

contact with intake openings, or any other electrical

components, i.e. at instrument cluster or under

dash.

Rear Knuckles

Lubricate two grease fittings on each axle with 2 or 3 shots of

grease every 50 hours or after each use if consistently running

unit in water deeper than axle. See Fig. 6-6.

Lube

Figure 6-6

Figure 6-7

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

Cub Cadet M467 Operator's Manual Page 17