Cub-cadet 726 TDE User Manual download pdf (Page 19)

Belt Replacement

Auger Belt

NOTE: It is not necessary to remove both belts in order to change

either one. If changing just one belt, be certain to check the

condition of the other belt.

Allow the engine to run until it is out of fuel. Do not 1.

attempt to pour fuel from the engine. Remove the key to

avoid unintended starting.

Remove the plastic belt cover at the front of the engine by 2.

removing the two self-tapping screws. See Fig. 7-1.

Tip the snow thrower up and forward so that it rests on its 3.

auger housing.

Remove the frame cover from the underside of the snow 4.

thrower by removing the self-tapping screws which secure

it. See Fig. 7-2.

Roll the auger belt off the engine pulley. See Fig. 7-3.5.

NOTE: Tracks removed for clarity

Figure 7-3

Figure 7-1

Figure 7-2

Service

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Cub-cadet 726 TDE User Manual Page 19