Single StageSnow ThrowerModel 521E Operator’s ManualPRINTED IN U.S.A.FORM NO. 770-10050B.fm(5/2000)IMPORTANT: Read safety rules and instructions caref
10If additional adjustment is required, follow steps below. • Remove the belt cover by removing five hex screws that hold it in place. For location o
11WARNING: Before servicing, repairing, orinspecting, disengage all clutch levers andstop engine. Wait until all moving parts havecome to a complete s
12SECTION 8: TROUBLESHOOTING GUIDENOTE: For repairs beyond the minor adjustments listed above, call the Customer Dealer Line at 1-800-528-1009 forthe
13SECTION 9: PARTS LIST FOR MODEL 521ERef. No. Part No. Description1.710-0487 Carriage Screw2.710-1270 Oval C-Sunk Machine Screw3.712-0324 Hex Lock N
14Model 521E722104637313413213833035627394012014635306528254542134472233917181542112619261632231236418
15Model 521ERef. No. Part No. Part Description1.710-0167 Carriage Bolt2.710-0276 Carriage Bolt3.710-0323 Pan Head Screw4.710-0451 Carriage Bolt5.710-0
16Model 521E 5352029221674623892721028262172571315141918241117
17Model 521ERef. No. Part No. Part Description1.684-0054A Dash Assembly2.684-0126 Chute Crank Assembly3.710-1003 Special Screw: 310-16 x 0.375”4.710-1
18Model 521ENOTE: For painted parts, please refer to the list of colorcodes below. Please add the applicable color code,wherever needed, to the part n
19Model 521E
2TABLE OF CONTENTSContent PageImportant Safe Operation Practices ... 3Assembling Your S
MANUFACTURER’S LIMITED WARRANTY FOR:TWO-YEAR RESIDENTIALONE-YEAR COMMERCIALProper maintenance of your Cub Cadet equipment is the owner’s responsibilit
3SECTION 1: IMPORTANT SAFE OPERATION PRACTICESWARNING: This symbol points out important safety instructions which, if not followed, could endanger t
46. Do not operate machine while under the influence of alcohol or drugs. 7. Muffler and engine become hot and can cause a burn. Do not touch.8. Exe
5SECTION 2: ASSEMBLING YOUR SNOW THROWERUnpacking From Carton• Cut along corners of the carton and lay it down flat. See Figure 1. Remove packing mat
6• Lift the control handle up, and hook the “Z” end of the control cable into the bottom hole in the control handle, from the outside to the inside .
7SECTION 3: KNOW YOUR SNOW THROWERBe familiar with all the controls and their proper operation. Know how to stop the machine and disengage them quick
8SECTION 4: OPERATING YOUR SNOW THROWERBefore StartingWARNING: Read, understand, and followall instructions and warnings on the machineand in this m
9• Wipe all snow and moisture from the unit. Move the choke lever back and forth several times and leave it in the ON position. Operating Tips• Discha
Comments to this Manuals