Cub Cadet 420A Operator's Manual download pdf (Page 7)

SECTION 2: KNOW YOUR UTILITY VEHICLE

NOTE: Reference to right or left hand side of the utility vehicle is observed from the operating position.

Figure 1

Read this operator’s manual, safety labels, and

operating instructions on the vehicle before operating.

Compare the illustrations in this manual with your unit

to familiarize yourself with the location of various

controls and adjustments. Reference to the right or left

hand side of unit is observed from the operating

position. Save this manual for future reference.

See Figure 1.

Read the Honda Engine operator’s manual before

operating this vehicle to familiarize yourself with the

engine controls and adjustments.

NOTE: Before operating your vehicle, follow the

starting instructions in the Operating Section and

check tire pressure per the recommendations in the

Maintenance Section.

Accelerator Pedal

The accelerator pedal is located on the right side of the

floor beneath the dash panel. Depressing the

accelerator pedal will move the vehicle in the direction

selected on the gearshift. As the pedal is depressed,

speed will increase to the maximum selected range.

Releasing the pedal reduces the speed, but does not

stop the vehicle. The brake must be applied to stop

vehicle. See Figure 2.

Brake Pedal

The brake pedal is located on the left side of the floor

beneath the dash panel. Remove foot from accelerator

pedal apply pressure to the brake pedal evenly until

vehicle slows down and stops. See Figure 2.

Figure 2

Parking Brake Latch

The parking brake latch is located on the right side of

the dash panel. It holds the brake in the engaged

position for parking. See Figure 3.

Brake Pedal

Accelerator Pedal

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Cub Cadet 420A Operator's Manual Page 7