Cub Cadet CC 550 SP Operator's Manual download pdf (Page 9)

Assembly & Set-Up

Contents of Carton

One Lawn Mower• One Grass Catcher• One Bottle of Oil•

One Lawn Mower Operator’s Manual• One Side Discharge Chute•

Assembly

NOTE: This unit is shipped without gasoline or oil in the engine.

Fill up gasoline and oil as instructed in the Engine Operation

section of this manual BEFORE operating your mower.

Handle

Remove any packing material which may be between 1.

upper and lower handles.

Pull up and back on upper handle as shown in Fig. a.

3-1. Do not crimp cable while lifting the handle up.

Remove star knobs from handle mounting brackets

and secure the lower handle onto the handle

brackets by placing the lower hole of the lower

handle onto the pins of the handle brackets.

Tighten star knobs securing upper handle to lower b.

handle. See Fig. 3-1. Make sure that each carriage

bolt is seated properly in the handle.

2. Tighten star knobs securing lower handle to handle

brackets. See Fig. 3-2. Make certain the lower handle is

seated securely into the handle mounting brackets.

Figure 3-1

3. The rope guide is attached to the right side of the upper

handle. Loosen the wing nut which secures it to the upper

handle. Refer to Fig. 3-3.

Figure 3-2

Figure 3-3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

No comments

Cub Cadet CC 550 SP Operator's Manual Page 9