Cub Cadet GTX 2100 Owner's Manual download pdf (Page 15)

ASSEMBLY

STEP 3:

DRIVE MECHANISM INSTALLATION:

WARNING

TO PREVENT INJURIES:

It is the person who installs the drive mechanism

responsibility to make sure that when the clutch

is disengaged that all moving parts stop.

For more information, do not hesitate to contact

the technical support.

WARNING

TO PREVENT INJURIES:

Stop the motor.

Apply parking brake.

Remove the ignition key.

Disconnect the wire from the spark plug(s) and

keep away from spark plug(s) to prevent accidental

starting.

NOTE: You must remove mower deck to install

the drive mechanism.

Install the drive mechanism (item 1).

# Item Description Action

1 Back of drive

mechanism

Hook on the tractor frame,

right side.

2 Front of drive

mechanism

Install between the

supports.

4 Pin

(qty 2)

Insert as shown.

On the right side, pin and

sleeve (item 3) from the

outside.

On the left side, and pin

from the inside.

5 Hair pin

(qty 2)

Secure the pins.

6 Carriage bolt

5/16’’ x 1’’

Insert in the back of the

drive as shown.

7 Bracket Install on the bolt as

shown and on the tractor

frame.

8 Knob Tighten to lock the drive

frame in place.

Install drive mechanism

For tractors with Electric Clutch:

Install the belt on the engine pulley of the vehicle.

Check the tension on the spring.

If necessary, adjust the tension by moving the

adjustment rod (item 1) and tighten the set screw

(item 2).

No modifications to be done

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments

Cub Cadet GTX 2100 Owner's Manual Page 15

Comments to this Manuals

Related products and manuals for Lawnmowers Cub Cadet GTX 2100