Cub Cadet TANK 60 Operator's Manual download pdf (Page 38)

38 se c t i O n 7— se r v i c e

4. ⁄” socket wrench on the pulley side of the spindle



5. ⁄” wrench.

Remove the blade.6.

To replace the blade reverse the above process and tighten 7.



NOTE: Add a small amount of multi-purpose grease to the

bolt threads to avoid corrosion and galvenic action.

WARNING! 

that are bent should be replaced. The cutting blades

are sharp and can cause severe injury. Wrap the

cutting surface of the blade with a rag to avoid

injury.

Sharpening the Blades



Clean any debris from the blades. Keep blades sharp and 2.

free of build up at all times.



balanced cutting blades. Do not sharpen the underside of

the blades. Use a electric blade sharpener, a conventional

electric grinder or a hand file to sharpen the blades.

Replace any blade with severe nicks or dents that cannot 4.

be removed by filing.

Check the balance of the blade after sharpening by placing 5.

it on a blade balancer. Do not use un-balanced blades.

If the blade dips on one end, file stock off of the cutting 6.

surface on that end.

NOTE: Replace any blades that cannot easily be balanced.

Replacing the Blades

WARNING! 



the parking brake lever, turn the ignition key to the





handling the blades. When servicing the mower

deck, be careful not to cut yourself on the

sharpened blades.

Remove the key from the ignition and disconnect the spark 

plugs.

2.

block it in that position.

Wrap a rag around one end of the blade and grasp it to 

prevent it from turning, or secure the blade by placing a

block of wood between the blade and the deck housing.



Figure 7-4

Flange Lock Nut

Blade

Hex Screw

Figure 7-5

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 47 48

Comments to this Manuals

No comments

Cub Cadet TANK 60 Operator's Manual Page 38

Comments to this Manuals

Related products and manuals for Tractor Cub Cadet TANK 60