Cub-cadet RZT-S Series User Manual download pdf (Page 22)

Z-Force-S

3. Remove the reverse pedal using a pair of 7/16”

wrenches. See Figure 3.3.

4. Remove the forward drive pedal: See Figure 3.4.

4a. Remove the screw that secures the drive

pedal to the pedal shaft bell crank using a 1/2”

wrench.

4b. Unhook the drive pedal from the bell crank.

5. Remove the lower steering column cover by remov-

ing the two screws, indicated by the arrows in Fig-

ure 3.4, using a T-30 torx driver.

6. Remove the nine screws that hold the floor pan to

the frame using a T-30 torx driver.

7. Lift the floor pan off of the mower.

8. Install the floor pan by reversing the previous steps.

NOTE: Confirm that all safety and control features

work correctly. Do Not return an unsafe

mower to service.

Figure 3.3

Reverse pedal

Figure 3.4

Forward drive pedal

Figure 3.5

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 135 136

No comments

Cub-cadet RZT-S Series User Manual Page 22