Cub Cadet 1529 Operator's Manual download pdf (Page 28)

• Install the new belt routing it EXACTLY as the old

one was routed. Refer to Figure 28.

• Install all tractor components by reversing the

previous instructions and following in the reverse

order.

IMPORTANT:

When remounting the electric PTO clutch,

make certain that is properly oriented against the anti-

rotation bracket prior to securing it to the engine’s

crankshaft. Torque the center hex bolt to between 38

foot-pounds and 50 foot-pounds.

Hydrostatic Transmission

The hydrostatic transmission is sealed at the factory

and is maintenance free. The fluid level cannot be

checked nor can the oil be changed.

Keep the area around the transmission cooling fan free

of grass and debris at all times.

Figure 28

FRONT OF TRACTOR

Fixed V-idler Pulley

Transmission Pulley

Engine Pulley

Hydrostatic

Double-Idler Bracket

V-idler Pulley

NOTE:

View shown from above tractor.

Idler Extension Spring

Drive Belt

Left Frame Rail

Flat idler Pulley

(Beneath Cooling Fan)

Transmission

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Cub Cadet 1529 Operator's Manual Page 28