Cub-cadet 3184 User Manual download pdf (Page 23)

23

• Left headlight — appoximately 1/4

turn counterclockwise.

• Right headlight — approximately

1/4 turn clockwise.

3. Push the bulb inward and turn

counterclockwise to remove from

the socket.

4. Align a locking post of the bulb

base with the notch in the socket,

then push the bulb inward and

turn clockwise to lock

5. With the terminals pointing

upward, align the tab of the

socket with the notch of the

reflector. Push the socket inward

and turn as follows to lock:

• Left headlight — appoximately 1/4

turn clockwise.

• Right headlight — approximately

1/4 turn counterclockwise.

6. Connect the wire harness leads to

the appropriate socket terminals.

Tire Inflation

Keep the tires inflated to the

recommended pressure. Improper

inflation will affect tire life and operator

comfort, and also could affect the level

of the mower deck and quality of cut.

See the tire side wall for proper

inflation range.

Ensure that the valve caps are

securely tightened in place to prevent

air loss and to protect the valve core.

Do not overload the tractor tires by

mounting equipment on the tractor

which exceeds the load capacity of the

size of the tires on the tractor.

Checking Transmission Oil Level

NOTE: Check the oil level only while

the engine is stopped and the tractor

is level.

Check the oil level of the transmission

case before each use to see that it is

filled to the correct level. Before

checking the transmission oil level,

clean the area around the

Transmission Oil Fill/Dipstick to

prevent debris from entering the

transmission case. Always keep the oil

level between the “FULL” and the

“ADD” marks on the dipstick. When

checking the oil level, the dipstick

must be withdrawn and wiped clean,

then reinserted all the way before

being withdrawn again for a true

reading.

Figure 18

Adding Transmission Oil

WARNING: The fluid for your

transmission has been spe-

cially formulated to ensure

the safe and proper opera-

tion of your tractor. Add Cub

Cadet Drive System Fluid

Plus ONLY. Do not use any

other fluid.

WARNING: Never overfill the

transmission case. Damage

may result if the oil level in

the transmission case is

below the “ADD” mark or

over the “FULL” mark of the

dipstick.

Transmission

Oil Fill Tube/

Dipstick

F

A

Operating

Range

Dipstick Reading

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Comments to this Manuals

No comments