Cub Cadet GTX1054 Operator's Manual download pdf (Page 13)

Systems Indicator Monitor/Hour Meter LCD

When the ignition key is



position but not into

the START position, the





output, in volts, on its

LCD for approximately

five seconds, after which

it displays an hour glass

and the hours of tractor



tractor is started, the

monitor continually

displays an hour glass and

the hours of tractor operation on its LCD.

NOTE: Hours of tractor operation are recorded any time the



whether the engine is started.

The Indicator Monitor will also remind the operator of

maintenance intervals for changing the engine oil. The LCD will



minutes, after every 50 hours of recorded operation elapse. The







this maintenance interval. Before the interval expires, change the



with this tractor.

Brake

If the Brake light illuminates when attempting to start the



PTO (Blade Engage)





Oil (If Engine So Equipped)



cranking during start-up, but if it illuminates during operation,

while the engine is running, stop the tractor immediately and



Battery

It is normal for the Battery light to illuminate while the engine is

cranking during start-up, but if it illuminates during operation,

while the engine is running, the battery is in need of a charge



amperage. Charge the battery as instructed in the Service

section of this manual or have the charging system checked by

your Cub Cadet dealer.

Deck Lift Lever



the deck lift lever is used to change

the height of the cutting deck. To

use, move the lever to the left, then

place in the notch best suited for your

application.

Ignition Switch Module

WARNING! Never leave a running machine



brake, stop engine and remove key to prevent

unintended starting.

To start the engine, insert the key

into the ignition switch and turn

clockwise to the START position.

Release the key into the 

 position once

the engine has fired.

To stop the engine, turn the

ignition key counterclockwise to

the  position.

CAUTION: Prior to

operating the tractor,

refer to both Safety

Interlock Switches



this manual for detailed instructions regarding the

Ignition Switch Module and operating the tractor in

.

Drive Pedal

The drive pedal is located on the right side

of the tractor, along the running board. Press

the drive pedal forward to cause the tractor

to travel forward. Ground speed is also

controlled with the drive pedal. The further

forward the pedal is pivoted, the faster the

tractor will travel. The pedal will return to its



Reverse Pedal

The reverse pedal is located on the right

side of the tractor along the running board.

Ground speed is also controlled with the

reverse pedal. The further downward the

pedal is pivoted, the faster the tractor will

travel. The pedal will return to its original



13Section 4 — controlS and FeatureS

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comments to this Manuals

No comments

Cub Cadet GTX1054 Operator's Manual Page 13

Comments to this Manuals

Related products and manuals for Garden tools Cub Cadet GTX1054