Cub-cadet GT-3204 User Manual download pdf (Page 19)

From just above the right axle carrier,

inside the right frame rail, slowly turn

the hex nylon lock nut at the end of

the brake rod as follows to adjust the

brake (Refer to Figure 18):

• Turn the nylon lock nut clockwise to

increase the braking force.

• Turn the nylon lock nut counter-

clockwise to decrease the braking

force.

Recheck the brake adjustment to

ensure proper operation, and readjust

as necessary. If brake adjustment

does not correct the problem, see your

authorized Cub Cadet dealer.

While guiding the transmission release

rod through keyhole and the oil fill

tube/dipstick into the transmission,

position the rear drawbar on the

frame. Secure with the four hex tapp

screws.

Turning Radius Adjustment

This tractor is equipped with hydraulic

power steering which is set at the

factory. The turning radius should be

equal for both left and right hand

turns. If adjustment is necessary

please contact your authorized Cub

Cadet dealer.

SECTION 9: MAINTENANCE

Maintenance Chart

‡ Change oil and filter after first 5 hours

† More often under dusty conditions

†† Clean every 25 hours or more often under dusty or dirty conditions

NOTE: We do not recommend the use of a pressure washer or garden hose to

clean your unit. They may cause damage to electrical components; spindles;

pulleys; bearings; or the engine. The use of water will result in shortened life

and reduce serviceability.

Operation to

be performed

Each Use

10 Hours

50 Hours

100 Hours

150 Hours

200 Hours

250 Hours

300 Hours

Grease front wheel bearings •

Grease L/R steering knuckles •

Grease front pivot axle •

Check engine oil level •

Change engine oil and filter ‡ • • •

Check spark plug condition • • •

Check transmission oil level •

Change transmission oil filter •••••

Change transmission oil • •

Check air cleaner & housing •

Clean & re-oil foam air

pre-cleaner

††

Change air cleaner

paper cartride

†††

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Comments to this Manuals

No comments

Cub-cadet GT-3204 User Manual Page 19

Comments to this Manuals

Related products and manuals for Special machinery Cub-cadet GT-3204