Cub-cadet S6031 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Assembly & Set-Up
3
10
Contents of Crate
 
Manual


Tractor Preparation
Remove the upper crating material from the shipping pallet, and
cut any bands or tie straps securing the tractor to the pallet.
Use the lift handle to raise the deck to its highest position.
Engage the transmission bypass valves on each side of the
tractor; then carefully roll the tractor off the shipping pallet.

transmission) are located just in front of the engine. Disengage

NOTE: When closing dump valves, finger tighten and snug with
wrench, only. Valve seat could be damaged if overtightened.
Remove the deck wash system nozzle adapter from the manual
bag and store for future use. Cut the wire tie holding the chute
deflector up and discard any packing material.
Figure 3-1
Install Roll Over Protective System (ROPS)

on your unit for shipping purposes. Using the hardware found in

as follows:


NOTE: 

Insert the carriage bolts (2. ⁄

rear toward the front if access is restricted.
NOTE: The mounting hardware is accessible from the rear
of the machine with the use of extensions. Also, access can
be gained by reaching in from the sides over the tires and
under the fuel tanks.
Three holes are provided on each side. Use the Upper hole 
and one of the other two remaining holes that is easily
accessible. Install the flange lock nuts, but do not tighten.

Figure 3-2
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Comments to this Manuals

No comments