Cub-cadet PR-521 User Manual download pdf (Page 8)

Assembling Grass Catcher

NOTE: Make certain bag is turned right side out before

assembling (warning label will be on the outside).

Parts for Soft Grass Bag:

1. Front Frame & Rear Frame

2. Grass Bag

Assemble grass bag as follows:

• Join the rear frame and front frame assembly as

shown in Figure 5A.

• Place bag over frame (black plastic side is the

bottom of bag). Slip the openings in the side of the

plastic channel on bag over the hooks on the grass

catcher frame.

• Secure bag to frame by working the plastic

channels on bag over frame as shown in Figure 5B.

All of the plastic channels except center top of bag

attach from the outside of bag. Center top of bag

attaches from the inside of bag.

Figure 5

Attaching Grass Catcher To Mower

NOTE: The mulching baffle is already in place on the

mower for shipping purposes. Your lawn mower is

equipped with both a mulching baffle and a mulching

plug. While the mulching baffle is located at the rear of

the mower, the mulching plug is located on the right

side of the cutting deck. Do not remove the mulching

plug from the mower even when you are not mulching.

• To remove the mulching baffle, lift the rear

discharge door on the mower. Remove the

mulching baffle. See Figure 7.

Figure 6

IMPORTANT:

Make sure cables are routed to the

outside of the handle so they are not in the way when

attaching the grass catcher.

• Lift the rear discharge door on the mower.

• Place the hooks on the grass catcher into the slots

in the handle bracket assemblies. See Figure 7.

Release the rear discharge door.

• To remove the grass catcher, lift the rear

discharge door on the mower. Lift the grass catcher

up, out of the slots in the handle bracket

assemblies. Release the rear discharge door.

WARNING: Never operate the mower

unless the hooks on the grass catcher are

firmly seated in the slots on the handle

bracket assemblies, and the rear

discharge door rests firmly against the

top of the grass catcher.

Figure 7

Converting To Side Discharge

If your unit is equipped with a side discharge chute, you

can convert to a side discharge mower as follows:

• Lift the rear discharge door and install the mulching

baffle. See Figure 7.

• On the right side of the mower, lift the mulching

plug. See Figure 8.

• Slide the two hooks of the side discharge chute

under the hinge pin on the mulching plug assembly

as shown below. Lower the side mulching plug.

• Do not remove the side mulching plug at any time,

even when you are not mulching.

Figure 8

Front

Frame

Assembly

Rear

Frame

Grass

Hook

Plastic

Channels

Bag

Mulching

Baffle

Deck

Slot in

Handle

Bracket

Assembly

Rear

Discharge

Door

Hinge Pin

Mulching Plug

Hook

Deflector

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Cub-cadet PR-521 User Manual Page 8

Comments to this Manuals

Related products and manuals for Gardening equipment Cub-cadet PR-521